Popular Articles
Unboxing and Primary Setup
Unboxing and Primary Setup Step 1: Place the printer on a nice flat surface. Step 2: Remove all the packing foam inside the printer and make sure it Is dust-free. Step 3: Check the Accessories kit for the supplies as we mentioned. Step 4: There ...
PrusaSlicer introduction
Introduction PrusaSlicer (formerly known as Slic3r Prusa Edition or Slic3r PE) is a slicer software based on the open-source project Slic3r. PrusaSlicer is an open-source, feature-rich, frequently updated tool that contains everything you need to ...
Getting Started With HYDRA
General safety The Hydra 3D printer has the ability to reach high temperatures and make fast movements, this can cause injury if you reach inside the machine during its working condition. Listed below are the general safety instructions. Do not ...
Getting Started with FabX Pro
General safety The FabX Pro printer has the ability to reach high temperatures and make fast movements, this can cause injury if you reach inside the machine during its working condition. Listed below are the general safety instructions. Do not ...
Setting up Filament
Setting up Filament Step 1: Go to Prepare and select Change Filament and select preheat PLA. Step 2: Fix the filament holder in the hole provided on the printer's left side and place the filament in it such that its loose end is towards the backside. ...