Astro Print App for Cloud3R Touch

Astro Print App for Cloud3R Touch




Control your 3D printer with your smart phone. Use the Astro Print mobile app to control your Cloud3r touch remotely. 

What can you do with the app ?
  1. Start and stop prints
  2. Monitor progress
  3. Maintain Print statistics 
  4. Have a history log 
  5. Direct access to online repositories like thingiverse

Installing  the app 

  1. Go to the play store/ ios app store and search for "Astro Print" and install the app



  1. Use your Astro print login and password details




  1. The home screen when you enter the app




The App can be divide as follows 
  1. Design Library: As the name suggests this will contain all the .gcode and .stl files, Gcode files can be uploaded to the printer for printing, whereas the STL files need to be sliced on a computer before hand. While remote printing is possible make sure to keep the build plate ready before hand for a print job.
  2.   Printers: This section opens up to the control panel of your cloud3r touch device. You can manually move the machine along the different axes and control the heaters. This section also helps you monitor a print status if the machine is currently printing
  3. Print History: This gives you the entire print history including the part name and the print time that was taken, it also has an activity tab that gives you detailed stats on the percentage of successful prints you have had, the number of printing hours and the filament consumption data
You also have the option of turning on and off notifications by pressing on the three lines on the top left and navigating to the settings menu.




    • Related Articles

    • Getting started with Cloud3R Touch

                                                                                                                Step 1: Your Cloud3r device is powered by astroprint, you must first create an account with astroprint by logging on to www.astroprint.com Click ...
    • Selecting Design

      Selecting Design Step 1: Insert the SD Card in the slot. Step 2: Go to Menu select Print from SD Card and select Calibration Cube.
    • Selecting Design

      Selecting Design Step 1: Insert the SD Card in the slot. Step 2: Go to Menu select Print from SD Card and select Calibration Cube.
    • Selecting Design

      Selecting Design Step 1: Insert the SD Card in the slot. Step 2: Go to Menu select Print from SD Card and select Calibration Cube.
    • How to Deal with Overhang

      Overhang The Overhang looks ugly is simply because the printed layer is not supported well enough by the previous layer. This layer is partially printed into mid-air thus it tends to sag down or curl up. Curling around the corners becomes more ...