Model removal from build plate
How to remove your print from the build plate
After the completion of the printing your 3D printed model needed to take down from the build plate. The following points should be taken into account.
Wait for cool down
Normally the average printing temperature of various materials is around 200-240 degrees Celsius. So, let the model cool down will make the model easy to remove. When the temperature on the DISPLAY shows 50-40 degrees Celsius, you can start removing the model, following images below show the same.
Advantage of MagFlex 2.0
Printers from 3Ding come with MagFlex 2.0 build plate this makes the model removable very easily. Let the model cool and just twist the model a bit, it will come out easily.
In case you have any further clarifications: Please call us at +91 8056123146 send us a mail at support@3ding.in
Related Articles
CURA 4.X Documentation
CURA 4.x Documentation of settings that are useful in CURA for our machines also needs to explore the full range of settings in CURA and see how to improve our slicer settings. Quality Layer Height: Controls the height of every layer, this will also ...Bed Leveling
How to fix the Bed Leveling? In 3D printing the vital role to ensure good adhesion of your print to the build plate. If the print does not stick well to the build plate, there’s a chance that it will become loose and that the print will fail. Good ...Unboxing and Primary Setup
Unboxing and Primary Setup Step 1: Place the printer on a nice flat surface. Step 2: Remove all the packing foam inside the printer and make sure it is dust-free. Step 3: Check the Accessories kit for the supplies as we mentioned. Step 4: There ...Unboxing and Primary Setup
Unboxing and Primary Setup Step 1: Place the printer on a nice flat surface. Step 2: Remove all the packing foam inside the printer and make sure it Is dust-free. Step 3: Check the Accessories kit for the supplies as we mentioned. Step 4: There ...Unboxing and Primary Setup
Unboxing and Primary Setup Step 1: Place the printer on a nice flat surface. Step 2: Remove all the packing foam inside the printer and make sure it is dust-free. Step 3: Check the Accessories kit for the supplies as we mentioned. Step 4: There ...