Navigation and Assisted Leveling

Navigation and Assisted Leveling

Navigation and Assisted Leveling

Step 1: Press the knob, to enter the menu and select options. 

Step 2: while being in the menu rotate the knob to navigate around.

Step 3: To start the bed leveling process, press the knob and navigate to the Home All option under the motion menu. The print head will come to the home position, select Assisted Leveling under the motion menu, and move to the first point.

Step 4: Take a piece of the A4 sheet and slide it in-between the nozzle and the Mag-flex Build plate.

Step 5: Loosen the wingnut down to move the bed up and tighten the wingnut to move the bed down to the point that is being leveled, when you pull the piece of paper you must feel a slight resistance.

Step 6: Follow the same process for all the corners of the bed and then come back Home.


    • Related Articles

    • Navigation and Assisted Leveling

      Navigation and Assisted Leveling Step 1: Press the knob, to enter the menu and select options.  Step 2: while being in the menu rotate the knob to navigate around. Step 3: To start the bed leveling process, press the knob and navigate to the Home All ...
    • Navigation and Assisted Leveling

      Navigation and Assisted Leveling Step 1: Press the knob, to enter the menu and select options. Step 2: while being in the menu rotate the knob to navigate around. Step 3: To start the bed leveling process, press the knob and navigate to the Home All ...
    • Navigation and Assisted Leveling

      Navigation and Assisted Leveling Step 1: Press the knob, to enter the menu and select options.  Step 2: while being in the menu rotate the knob to navigate around. Step 3: To start the bed leveling process, press the knob and navigate to the Home All ...
    • Bed Leveling

      How to fix the Bed Leveling?  In 3D printing the vital role to ensure good adhesion of your print to the build plate. If the print does not stick well to the build plate, there’s a chance that it will become loose and that the print will fail. Good ...
    • Messy First Layer

      First Layer issues  It could be that the print simply does not stick or you’re finding unwanted lines that cause the bottom shell to have an unexpected look. Additionally, it’s entirely possible for any fine detail on the bottom of your print to ...