Selecting Design

Selecting Design

Selecting Design


Step 1: Insert the SD Card in the slot.

Step 2: Go to Menu select Print from SD Card and select Calibration Cube.


    • Related Articles

    • Selecting Design

      Selecting Design Step 1: Insert the SD Card in the slot. Step 2: Go to Menu select Print from SD Card and select Calibration Cube.

    • Selecting Design

      Selecting Design Step 1: Insert the SD Card in the slot. Step 2: Go to Menu select Print from SD Card and select Calibration Cube.

    • Selecting Design

      Selecting Design Step 1: Insert the SD Card in the slot. Step 2: Go to Menu select Print from SD Card and select Calibration Cube.

    • Getting Started With HYDRA

      General safety The Hydra 3D printer has the ability to reach high temperatures and make fast movements, this can cause injury if you reach inside the machine during its working condition. Listed below are the general safety instructions.  Do not ...

    • Getting Started with FabX Pro

      General safety The FabX Pro printer has the ability to reach high temperatures and make fast movements, this can cause injury if you reach inside the machine during its working condition. Listed below are the general safety instructions.  Do not ...