Updating Firmware Using PrusaSlicer

Updating Firmware Using PrusaSlicer


Updating firmware using PrusaSlicer 


Step 1: Connect your printer to the computer or laptop using the USB cable (Port will be near to the power socket on the machine)


Step 2: Select flash printer firmware from the configuration tab 



Step 3: Browse the downloaded firmware and select the serial port and click flash, the firmware will be flashed. once it's completed click close.



    • Related Articles

    • Firmware update using Cura

      Updating Firmware Using Cura Step 1: Connect your printer to the computer or laptop using a USB cable (Port will be near to the power socket on the machine) Step 2: go to machine settings Step 3: Select the serial port where the printer is connected ...
    • Marlin Firmware Update

      Marlin Firmware Update for FabX Series. 
Compatibility: FabX Pro , FabX XL & FabX ME were delivered From Jan 2021 to August 2021 with monochrome LCD

 & 4 point levelling. Download: FabX Pro v 2.0.9.1 Release Date Sep 29, 2021. Click Here v 1.1.9.x ...
    • PrusaSlicer Documentation

      PrusaSlicer Documentation   Documentation of settings that are useful in PrusaSlicer for our machines also needs to explore the full range of settings in PrusaSlicer and see how to improve our slicer settings. Quality o   Layer Height: Controls the ...
    • PrusaSlicer introduction

      Introduction PrusaSlicer (formerly known as Slic3r Prusa Edition or Slic3r PE) is a slicer software based on the open-source project Slic3r. PrusaSlicer is an open-source, feature-rich, frequently updated tool that contains everything you need to ...
    • Prusaslicer User Interface

      Prusaslicer User Interface Step 1:  the object can insert by dragging into the prusaSlicer window or click add and import the stl from its location  Step 2: Once the object is imported, select the filament and printer that need to select from the ...