Prusaslicer User Interface

Prusaslicer User Interface



Prusaslicer User Interface


Step 1:  the object can insert by dragging into the prusaSlicer window or click add and import the stl from its location 



Step 2: Once the object is imported, select the filament and printer that need to select from the drop-down box on the right side 

                  


Step 3:  Select the support required for the object to be print. 

In Support on built plate option, the support is generated only from the built plate to the object

In For support Enforces only option the supports are generated on the place requires supports are selected manually 

In Everywhere option the supports are generated everywhere I,e Supports generated from the built plate as well as from the object   


Step 4: Select the amount of the infill based on the purpose of the object 



Step 5: Click Slice now in the right bottom to get the G-Code 




    • Related Articles

    • PrusaSlicer introduction

      Introduction PrusaSlicer (formerly known as Slic3r Prusa Edition or Slic3r PE) is a slicer software based on the open-source project Slic3r. PrusaSlicer is an open-source, feature-rich, frequently updated tool that contains everything you need to ...
    • PrusaSlicer Documentation

      PrusaSlicer Documentation   Documentation of settings that are useful in PrusaSlicer for our machines also needs to explore the full range of settings in PrusaSlicer and see how to improve our slicer settings. Quality o   Layer Height: Controls the ...
    • Updating Firmware Using PrusaSlicer

      Updating firmware using PrusaSlicer  Step 1: Connect your printer to the computer or laptop using the USB cable (Port will be near to the power socket on the machine) Step 2: Select flash printer firmware from the configuration tab  Step 3: Browse ...
    • Getting Started with FabX Lite

      General safety The FabX Lite printer has the ability to reach high temperatures and make fast movements, this can cause injury if you reach inside the machine during its working condition. Listed below are the general safety instructions.  Do not ...
    • Marlin Firmware Update

      Marlin Firmware Update for FabX Series. 
Compatibility: FabX Pro , FabX XL & FabX ME were delivered From Jan 2021 to August 2021 with monochrome LCD

 & 4 point levelling. Download: FabX Pro v 2.0.9.1 Release Date Sep 29, 2021. Click Here v 1.1.9.x ...