Tips and Tricks
How to Deal with Overhang
Overhang The Overhang looks ugly is simply because the printed layer is not supported well enough by the previous layer. This layer is partially printed into mid-air thus it tends to sag down or curl up. Curling around the corners becomes more ...
Model removal from build plate
How to remove your print from the build plate After the completion of the printing your 3D printed model needed to take down from the build plate. The following points should be taken into account. Wait for cool down Normally the average printing ...
How to Deal with Filament Feeding Issue
How to Fix Filament issue This issue consists of the filament not extruding from the nozzle. There could be thre possible reasons for that The filament may have got Tangled In this case the filament may have got from the spool side resulting in ...
How to Fix Stringing
STRINGING Normally your printer is not supposed to deposit the plastic filament in the open space while moving one point to another point. However molten plastic will often leak onto the parts where it should not. These strands of plastic are called ...